When you should remove a tree in Toronto

There are multiple benefits a tree can provide to your home and property in Toronto.

In general, it’s always a good idea to keep any trees that are already on you property in Toronto Ontario. However, there are risks associated with living under a large tree. When should you let go of that Tree? All trees at some point become unsafe due to age or other factors if left on your property. When that time comes, it is far safer to have the tree removed instead of risking potential danger to your family or damage to your home. Do not let it linger if you notice abnormal things happening to your tree.  Your best bet is getting a hold of a professional tree service Toronto company, who can take a look at the tree and guide you in the right direction as to what to do next. Don’t forget that dead branches can come down at any moment and pose significant danger if they do drop. This should be dealt with as soon as possible to minimize the chance of injury or damage.

There are indicators as to whether there is a risky tree and how to identify them.

One of the first things you can do is get a good view of the entire tree. Upon examination see if you notice any leaning, of course there can be a natural lean to the tree already, but if you aren’t sure about wether this is a new lean or not, you should get a hold of an arborist. When there’s a lean in a tree, it can be a good indicator that the tree may be dying and potentially can fall over.

tree removal service of unwanted trees

Another thing to look at is the area around the base of the tree.

Roots are great indicators of health. If for example they are decaying or visibly damaged, it can mean that the there’s a loss of some of its foundational support and runs the risk of toppling over. Take a look where the base touches the ground, if there’s any separation between ground and tree, a new lean may have happened and the tree may have lost some of its structural soundness. A professional can deduct wether the tree has been infested by insects and rotted away, by inspecting for fungus and chips of wood at the base of the tree.

Thirdly, the trunk is another place to inspect on the tree.

Crevices and cracks in a trunk are a good sign that the tree has lost it’s structural integrity. Cavities aren’t %100 reason to remove the tree, however further inspection to needs to be done to know how extensive it is. Arborists will be able to determine this as well. Bark that has been peeled off and is not there anymore is also a good way to know that the tree is dying, make sure that there aren’t patches of missing bark. Trunks are great was to tel if the tree is infested , rotting, dead or sick.

Canopies are another good place to look for clues into the health of a tree, this again should be done by an arborist. Canopies can hide dangerous dead branches and thus are a danger to the property and family. Missing bark and dead leaves on a branch are tell tale signs that the branch has been cut off from the trees nutrient source and is in danger of falling off. Remove any of these dead branches as soon as possible. when you should remove a tree.

Continue Reading

Spray foam insulation R-value in Toronto

Learn what Spray foam insulation R-value means in Toronto

This is a great product made from polyurethane polymer. It comes about as an alternative use of fiberglass insulation that was used traditionally during construction. Compared to other types of insulation, this one reduces air leakage. It can also be used to fix cracks in the walls. This spray is installed by a spray foam contractor with the necessary chemicals and equipment. However, this spray foam is very messy when used. It is also not foolproof more so when wrongly mixed under an unfavorable temperature. It is prepared by mixing and reacting unique liquid components on a site using special equipment and as soon as the chemicals are mixed a chemical reaction begins leading to foams from a fluid mixture, and it then hardens. Insulation helps to cut heat loss and to control the surface temperature. R-value is the common term that is used to assess the type of insulation one may need to use. It measures how well a particular insulation will resist the flow of heat but does not measure the heat movement. Its use is much efficient and causes comfortably. The problems that may come about due to its use are less frequent and easier to overcome. Putting spray foam insulation in a building requires a thermal barrier which separates it from the occupied space. This can be used to increase fire resistance in the case of a fire outbreak.

different r values of spray foam insulation in Toronto

Spray foam can be employed:

  • Around exterior faucets
  • At electrical and gas penetrations
  • On water filters
  • On securing walls in the landscape
  • Where sliding and foundation meets

There are two primary flavors of the spray foam.

The open-cell foam and the closed-cell foam. They have different densities. The density of the form, in this case, is directly proportional to the R-value per inch. The closed-cell foam has a larger density that the open-cell one making its R-value to be higher. The open-cell foam is vapor-permeable, and it uses significantly less material, and this makes it look more attractive. It often requires an interior vapor retarder. It uses carbon or water as the blowing agent. Whereas the closed-cell foam is a vapor retarder. It is the most expensive insulator. Its performance is way better than any other insulation. Its high density makes it be able to add structural strength to the walls and impact resistance. Closed cell spray foam can be applied at a low temperature, and it is ideal for a continuous insulation. It has a higher tensile and a significant bond strength. However, it rejects bulk water. It is suitable for both interior and exterior insulation. It has R-value of 6″. Open cell spray foam can be installed at a low cost, and it can achieve great R-value because it suffers no restriction by space. Using it makes it possible to a long-term creep and seasonal movements, permitting bi-directional drying. It is mostly suitable for interior insulation. It has a sound dampening. It does not reject bulk water. It has R-value of about 3.5-3.7″. this type of spray foam insulator is also known as half-pound foam.

Open-cell spray foam is applied to the walls, the ceilings, and the roof while closed-cell spray foam is used under slabs, walls (below or above grades), roofs and ceilings.

The common mistakes users make when spraying the insulation is:

  • Not ensuring that the foam is thick enough
  • Missing out the leakage sites.
  • Having no understanding on the building envelope hence spraying too much or too little.

In order to determine insulation effectiveness consider:

  • Convection
  •  Air intrusion
  • Conduction
  • Moisture accumulation
  • Radiation
  • Air infiltration

Pros and cons of Foam Insulation in Toronto

Spray foam insulation helps lower utility cost. This is because it blocks both cold and heat from outdoors. It can insulate homes better than the traditional products. It also can provide protection against moisture which may cause mildew and mold. It serves as a noise distraction.

It causes health issues because it can affect the respiratory system and causes eye irritation. It can cause inflammation to the skin through direct contact, leading to a rash. It may be a cause of a dry cough, headaches, fever, muscle aches and chest tightness.



Continue Reading